In an apartment building, water sometimes travels through several dozen meters of pipes before reaching the taps in each apartment. While water supplied by the public network is subject to regular health checks, its quality can change as it comes into contact with the building's internal installations.
Old pipes, corrosion, stagnation, deposits or a malfunctioning hot water system: several factors can affect water quality within a co-owned building.
When a resident notices cloudy water, unusual discoloration or a recurring problem, one question quickly comes up: who is responsible for water quality in the building? The property manager, the water supplier or the co-owner?
The answer depends in particular on the source of the problem and on whether the installations concerned are shared or private.
FLX Water reviews everyone's responsibilities, the risks to watch for and the solutions for preserving water quality in residential buildings.
Why can water quality deteriorate in an apartment building?
In France, tap water is subject to health monitoring organized by the regional health agencies (ARS), in addition to the monitoring carried out by water suppliers.
These checks verify compliance with the regulatory requirements applicable to water intended for human consumption.
But between the delivery point and an apartment's tap, water flows through an internal network whose characteristics can affect its quality.
Aging pipes
In some older buildings, pipes may be made of materials that can corrode or release substances on contact with water.
The presence of lead in some old installations is a particularly important example.
Copper and nickel can also be found in water because of the materials and fittings used.
Concentrations depend in particular on the composition of the water, the materials present and how long the water has been standing.
Water stagnation
In unoccupied homes, apartments used only occasionally or rarely used sections of the shared network, water can sit still for long periods.
This stagnation can promote some forms of corrosion and, under certain conditions, the growth of microorganisms.
The risk depends on the type of installation, the temperature and how well the network is maintained.
Deposits and work on the installations
Pipes can gradually build up deposits from corrosion or from particles in the water.
Works, pressure variations or putting the system back into service can sometimes stir these deposits back into suspension.
Residents may then notice temporarily discolored or cloudy water.
Any unusual change in the appearance of the water should be reported and properly checked.
Who is responsible for water quality in a co-owned building?
Responsibility for water quality in an apartment building does not rest with a single party.
A distinction must be made between public distribution, shared equipment and private installations.
The water supplier: quality up to the delivery point
The service responsible for distributing water must comply with the health obligations applicable to the water it supplies.
Its responsibility is assessed in particular with regard to the delivery point and the limits set by the regulations.
When the deterioration in water quality is attributable to private distribution installations or their maintenance, the supplier's liability may be ruled out under the conditions laid down in the regulations.
This distinction is explained in particular by the French Ministry of Health in its documentation on water and lead.
The owners' association: maintaining shared installations
The owners' association (syndicat des copropriétaires) collectively represents the building's owners.
It is responsible for preserving and administering the common areas, and for managing the shared equipment that falls under its responsibility.
Risers, some pipes and shared hot water production systems may be part of the common areas, depending on the co-ownership rules and the layout of the building.
The association must therefore take the necessary measures regarding the shared equipment it is responsible for.
The property manager: administering, maintaining and acting in an emergency
The property manager (syndic) administers the building on behalf of the owners' association.
Article 18 of the French law of July 10, 1965 entrusts it in particular with ensuring the preservation, safekeeping and maintenance of the building.
It must also implement the decisions of the general meeting and may, in an emergency, carry out the work needed to safeguard the building within the scope of its legal powers.
In practice, when a problem concerns the shared water installations, its role may include:
- Receiving and reviewing reports from residents.
- Calling in a plumber, an operator or a qualified laboratory.
- Organizing the necessary work on shared equipment.
- Informing co-owners and residents when the situation requires it.
- Preparing work to be submitted to the general meeting, except for measures it can take under its own powers.
The property manager is therefore not automatically responsible for every water quality issue. However, it may be held liable if a fault in the performance of its duties is established.
The co-owner: private installations
Each co-owner is generally responsible for maintaining the private equipment belonging to their unit.
This may include certain internal pipes, taps and fixtures, or equipment installed in their apartment.
The exact allocation of responsibilities should be checked in the co-ownership rules, in light of the applicable regulations.
In a rented home, the tenant should generally report any problem to the landlord, who can then contact the property manager if the issue concerns the common areas.
Which contaminants and problems should be monitored in shared water networks?
1. Lead and other metals
Lead can be released by certain materials found in old installations.
Prolonged exposure to lead is a health risk, particularly for young children and pregnant women.
Copper and nickel can also come from certain fittings in contact with the water.
When old pipes are suspected, a targeted analysis and an inspection of the network help guide decisions.
Replacing the materials responsible remains an essential measure once a problem is confirmed.
2. Bacteria and Legionella
Under certain conditions, internal water networks can promote the growth of microorganisms.
The Legionella issue particularly concerns domestic hot water installations.
These bacteria can multiply in networks where temperatures and flow conditions favor their growth.
Legionnaires' disease is mainly associated with inhaling aerosols of contaminated water, particularly when showering.
Managing temperatures, limiting stagnation and maintaining installations are important preventive measures.
3. Particles, deposits and turbidity
Cloudy or discolored water may be linked to deposits in the pipes, corrosion or work on the network.
These changes alone do not indicate whether the water is dangerous.
They should nevertheless be investigated, particularly when they persist or affect several homes.
4. PFAS, pesticides and other chemical contaminants
Some chemical contaminants may be present in the water resources used to produce drinking water.
These may include PFAS, pesticides or certain chemical residues.
These substances are generally linked to the quality of the water resource and to upstream treatment, rather than to the aging of the building's pipes.
Their possible presence should be assessed on the basis of the available analyses and the substances actually tested for.
Additional filtration can be considered when specific contaminants justify it, provided its performance is documented.
Shared domestic hot water: what are the obligations regarding Legionella?
In co-owned buildings with shared domestic hot water production, maintaining the installations is a major issue.
Preventing Legionella relies in particular on controlling temperatures, keeping water circulating and maintaining equipment.
Are all residential co-owned buildings subject to the same checks?
No.
The French order of February 1, 2010 on Legionella monitoring sets specific obligations for certain categories of establishments, including healthcare facilities, social and medico-social establishments, hotels, campsites and other establishments open to the public with at-risk points of use.
An exclusively residential co-owned building does not automatically fall within this scope.
However, shared hot water installations must comply with the technical rules that apply to them, particularly regarding temperature and health safety.
The layout of the building and any premises open to the public may change the obligations to be considered.
What good practices should be adopted?
For shared hot water networks, several measures can help limit the risks:
- Ensure regular maintenance of production and storage installations.
- Check temperatures at the relevant points of the network.
- Limit stagnation areas.
- Maintain equipment and check that it is working properly.
- Call in qualified professionals when problems are identified.
Settings must meet the applicable technical and health requirements, while preventing the risk of scalding.
A filtration system installed on an apartment's water inlet cannot, on its own, prevent Legionella from multiplying in hot water networks located downstream or in shared installations.
How can you tell if your building's water has a problem?
Before undertaking any work, it is essential to identify the source of the problem.
Step 1: check your municipality's official analyses
The results of health monitoring of supplied water are available free of charge in France.
On Service-Public.fr, individuals can access official information on tap water quality in their municipality.
These results show which parameters were tested and any reported non-compliance.
However, they do not replace a specific analysis of the building's internal network.
Step 2: identify the homes affected
A problem reported in a single apartment does not necessarily have the same cause as an issue observed in several homes at the same time.
The property manager can gather the following information:
- The apartments and floors affected.
- When the problem first appeared.
- Whether the problem is permanent or temporary.
- Whether the problem affects cold water, hot water or both.
- Any recent work on the installations.
This information helps guide the diagnosis.
Step 3: inspect the shared installations
A technical inspection may be needed to check the condition of the pipes, storage equipment, existing treatment devices or hot water production.
The inspection should be suited to the nature of the reported problem.
Step 4: carry out targeted analyses
When the situation warrants it, samples can be taken at different points in the network.
Comparing the main inlet with the taps in the apartments can help determine whether the deterioration is occurring inside the building.
The parameters tested should be chosen according to the context: metals, microbiology, turbidity or specific chemical substances.
For usable results, use a qualified laboratory and follow an appropriate sampling protocol.
What should the property manager do when a resident reports abnormal water?
A report does not automatically mean that contamination is present.
It should nevertheless be handled proportionately, particularly when it concerns several homes or suggests a health risk.
1. Gather information
The property manager should try to understand the nature of the problem: discoloration, odor, unusual taste, deposits, interruption of supply or a worrying test result.
It is useful to keep a written record of reports and the steps taken.
2. Check whether the public network is involved
The water supplier can be contacted to find out whether works, an incident or a water quality issue have been reported in the area.
If several neighboring buildings have the same problem, this information can guide the investigation.
3. Call in a professional
When the cause seems to lie in the shared installations, a technical inspection may be necessary.
Depending on the situation, the property manager may call on a plumber, an operator of shared installations or a testing laboratory.
4. Inform residents
When a risk has been identified or precautionary measures are in place, residents should receive clear information about the situation and the uses concerned.
When an official health restriction is issued, its instructions must be followed.
5. Organize corrective measures
Interventions can range from routine maintenance to replacing pipes.
Decisions and funding arrangements depend on the type of equipment, the degree of urgency and the co-ownership rules.
The property manager can take some urgent measures under its own powers, while other work requires a decision by the general meeting.
What solutions can improve water quality in a co-owned building?
The right solution depends on the source of the problem and the installations concerned.
| Issue | Solution to consider |
|---|---|
| Old pipes releasing metals | Diagnosis and replacement of the materials concerned. |
| Stagnation in the network | Checking circulation and adapting maintenance. |
| Legionella risk in hot water | Temperature management, maintenance and appropriate health measures. |
| Particles and deposits | Identifying the source, maintenance and filtration where relevant. |
| Specific chemical contaminants | Analyses, performance checks and study of a suitable treatment. |
| Improving water quality in an apartment | Individual filtration on the home's water inlet, if compatible. |
Replacing pipes when necessary
If degraded materials are causing contamination, the priority is to address the cause of the problem.
A filtration system installed at an apartment's inlet cannot prevent a downstream pipe from releasing lead or other metals.
Maintaining shared installations
Regular maintenance of networks, storage equipment and hot water installations helps prevent certain problems.
It should be adapted to the characteristics of the building and the applicable obligations.
Individual filtration as a complement
Alongside work on the shared installations, residents can consider a filtration solution suited to their home.
When installed on the individual water inlet, whole-home filtration treats the water before it is distributed to the points of use downstream.
This approach lets residents take action at the scale of their apartment, without requiring a shared system for the whole building.
However, it remains a complement to network maintenance and does not replace the measures required when there is a health risk.
FLX Compact: filter water directly in your apartment
While the property manager and the owners' association handle the management of shared installations, residents can also consider an individual solution to improve the water quality in their home.
At FLX Water, we developed the FLX Compact, a compact whole-home filtration system designed for houses and apartments supplied by the public drinking water network.
Filtration on the individual water inlet
Unlike filters installed on a single tap, the FLX Compact connects to the home's main water inlet, where the layout allows.
It filters the water before it is distributed to the various points of use downstream of the unit: kitchen, bathroom and other household appliances.
This approach can be particularly attractive for co-owners who want to improve the water quality in their apartment without installing a building-wide filtration system.
Filtration technology without electricity or chemicals
The FLX Compact combines several complementary technologies:
- Hollow fibers calibrated to 0.1 micron.
- Electro-adsorption technology.
- High-density activated carbon.
This combination reduces certain targeted contaminants, including PFAS, pesticides, heavy metals and microorganisms, within the limits of the performance demonstrated by test results.
It also helps improve the taste and odor of the water, while retaining naturally occurring minerals.
The unit runs on network pressure, with no power supply and no added chemicals.
Can an FLX Compact be installed in every apartment?
No. Compatibility depends in particular on access to the individual water inlet, the available pressure, the installation space and the layout of the pipes.
If installation requires work on a common area or shared equipment, the appropriate authorizations must be obtained before the work begins.
The FLX Compact does not replace maintenance of shared pipes and cannot prevent contamination from equipment located after the filter.
Do you live in a co-owned building and want to filter the water in your apartment? Discover the FLX Compact and check whether your installation is compatible.
Installing a water filter in your apartment: do you need the property manager's approval?
In a co-owned building, installing an individual filtration system depends on where the filter goes and the nature of the work required.
Installation limited to private equipment
When a filter can be installed exclusively on private pipes, without altering the common areas or shared equipment, authorization from the general meeting is generally not required.
It is still important to check the co-ownership rules and make sure the installation does not disrupt the operation of the network.
Work on common areas
If the work affects a shared pipe, a riser or shared equipment, prior authorization from the general meeting may be required.
The co-owner should then contact the property manager to find out what steps to take.
Check compatibility before buying
Before choosing a filtration solution, it is advisable to check:
- The location of and access to the individual water inlet.
- The available pressure.
- The space needed to install and maintain the filter.
- The layout of the home's pipes.
- Any constraints arising from the co-ownership rules.
The FLX Compact was designed to provide whole-home filtration in a compact format, suited to homes with compatible installations.
Conclusion: a shared responsibility for preserving water quality
Water quality in a co-owned building depends on both the public network and the building's internal installations.
The water supplier, the owners' association, the property manager and the co-owners each have a distinct scope of responsibility.
When a problem arises, the key is to identify its source before choosing a solution.
Targeted analyses, maintenance of installations, replacement of faulty pipes and suitable filtration are complementary responses.
For co-owners who want to take action at the scale of their home, FLX Water offers the FLX Compact, a whole-home filtration solution installed on the individual water inlet, subject to compatibility.
It improves the quality of the filtered water in the apartment, in addition to the essential maintenance of shared networks.
FAQ: water quality and responsibilities in co-owned buildings
Is the property manager responsible for water quality in the building?
The property manager administers and maintains the building on behalf of the owners' association. It must act within the scope of its duties when a problem concerns the shared installations. However, it is not automatically responsible for every problem, particularly when it originates in the public network or a private installation.
Who pays for a water analysis in a co-owned building?
Who pays depends on the context, the source of the problem, the equipment concerned and the applicable decisions. An analysis of a shared network may be an expense of the owners' association. An analysis requested by an individual is not automatically paid for by the co-ownership.
Can you ask the property manager to have the water analyzed?
Yes, a co-owner can report a problem and ask the property manager to look into the situation. Whether an analysis is carried out will depend in particular on the information available, the scope concerned and the measures required.
Who must replace lead pipes in a building?
Responsibility depends on whether the pipes are shared or private. The co-ownership rules and the applicable regulations determine who must organize and pay for the work.
Can you install a water filter in an apartment in a co-owned building?
Yes, subject to technical compatibility. When the installation concerns only private equipment and does not alter the common areas, authorization from the general meeting is generally not required. If work on shared equipment is involved, contact the property manager.
How can Legionella be prevented in a building?
Prevention relies in particular on maintaining domestic hot water installations, controlling temperatures and limiting stagnation. The exact obligations depend on the type of building and the installations concerned.
Can individual filtration remove all contaminants?
No. Performance varies depending on the technology, the substances present and the conditions of use. A filtration system should be chosen based on an identified need and appropriate test results.
How can you find out the quality of the water supplied in your municipality?
Official health monitoring results for water are available free of charge on Service-Public.fr. They provide information on the supplied water, but do not replace a targeted analysis of the building's internal installations.
Official sources
- Légifrance — Law No. 65-557 of July 10, 1965 establishing the status of co-ownership of built properties. Duties of the property manager and responsibilities of the owners' association.
- Service-Public.fr — Co-ownership property manager (syndic). Administration, maintenance, works and management of common areas.
- French Ministry of Health — Water and lead. Sources of lead in water and the responsibilities of the various parties.
- Légifrance — Order of February 1, 2010 on Legionella monitoring. Scope of the specific monitoring obligations.
- Légifrance — French Public Health Code. Provisions on water intended for human consumption.
- Service-Public.fr — Tap water quality. Access to official analysis results by municipality.
Solution recommandée
FLX Compact
Filtration de l'eau sans électricité ni produits chimiques. Réduit les impuretés, les goûts et les odeurs.